prikaz prve stranice dokumenta Mechanical Characteristics of Individualized Biodegradable Augmentation Scaffold—In Vitro Pilot Study
  Preuzmi
PDF 13.2 MB
Znanstveni rad - Izvorni znanstveni rad
Mechanical Characteristics of Individualized Biodegradable Augmentation Scaffold—In Vitro Pilot Study
Materials, 17 (2024), 6; 1419. https://doi.org/10.3390/ma17061419
Bjelica, Roko; Prpić, Vladimir; Drvar, Nenad; Ćatić, Amir; Gabrić, Dragana

Citirajte ovaj rad

Bjelica, R., Prpić, V., Drvar, N., Ćatić, A. i Gabrić, D. (2024). Mechanical Characteristics of Individualized Biodegradable Augmentation Scaffold—In Vitro Pilot Study. Materials, 17. (6). doi: 10.3390/ma17061419

Bjelica, Roko, et al. "Mechanical Characteristics of Individualized Biodegradable Augmentation Scaffold—In Vitro Pilot Study." Materials, vol. 17, br. 6, 2024. https://doi.org/10.3390/ma17061419

Bjelica, Roko, Vladimir Prpić, Nenad Drvar, Amir Ćatić i Dragana Gabrić. "Mechanical Characteristics of Individualized Biodegradable Augmentation Scaffold—In Vitro Pilot Study." Materials 17, br. 6 (2024). https://doi.org/10.3390/ma17061419

Bjelica, R., et al. (2024) 'Mechanical Characteristics of Individualized Biodegradable Augmentation Scaffold—In Vitro Pilot Study', Materials, 17(6). doi: 10.3390/ma17061419

Bjelica R, Prpić V, Drvar N, Ćatić A, Gabrić D. Mechanical Characteristics of Individualized Biodegradable Augmentation Scaffold—In Vitro Pilot Study. Materials [Internet]. 20.03.2024. [pristupljeno 01.07.2024.];17(6). doi: 10.3390/ma17061419

R. Bjelica, V. Prpić, N. Drvar, A. Ćatić i D. Gabrić, "Mechanical Characteristics of Individualized Biodegradable Augmentation Scaffold—In Vitro Pilot Study", Materials, vol. 17, br. 6, Ožujak 2024. [Online]. Dostupno na: https://urn.nsk.hr/urn:nbn:hr:127:350808. [Citirano: 01.07.2024.]

Za citiranje koristite ovu mrežnu adresu: https://urn.nsk.hr/urn:nbn:hr:127:350808
Prijavite se u repozitorij kako biste mogli spremiti objekt u svoju listu.
Podaci o radu
Naslov (engleski)Mechanical Characteristics of Individualized Biodegradable Augmentation Scaffold—In Vitro Pilot Study
AutorRoko Bjelica
AutorVladimir Prpić
AutorNenad Drvar
AutorAmir Ćatić
AutorDragana Gabrić
Autorova ustanova(Klinički bolnički centar Zagreb)
Autorova ustanovaSveučilište u Zagrebu
Stomatološki fakultet
Znanstveno / umjetničko
područje, polje i grana		BIOMEDICINA I ZDRAVSTVO
Dentalna medicina
Sažetak (engleski)
The alveolar ridge reconstruction of vertical and combined bone defects is a non-predictable procedure with varying percentages of success. The greatest challenge for vertical and combined bone augmentation is to maintain mechanical stability of the bone graft; therefore, it is mandatory to provide and preserve space for bone regeneration. The development of biomaterials and 3D printing has enabled the use of polymer scaffolds in the reconstruction of alveolar ridge defects. The aim of this pilot study was to evaluate the mechanical characteristics of an innovative individualized biodegradable polylactic acid (PLA) scaffold, under dynamic conditions, simulating biodegradation and the influence of masticatory forces. After the design and 3D printing of PLA scaffolds, two groups of 27 scaffolds were formed according to the compression testing procedure. The compression tests were performed in occlusal and lateral directions. In each of the two groups, nine subgroups of three scaffolds were formed for different testing periods during in vitro degradation with a total period of 16 weeks. Results showed that biodegradation and load application had no significant influence on mechanical characteristics of tested scaffolds. It can be concluded that simulated masticatory forces and biodegradation do not significantly influence the mechanical characteristics of an individualized biodegradable augmentation scaffold.
Ključne riječi (engleski)
Jezikengleski
Vrsta publikacijeZnanstveni rad - Izvorni znanstveni rad
Status objaveObjavljen
Vrsta recenzijeRecenziran - međunarodna recenzija
Verzija publikacijeObjavljena verzija rada (izdavačev PDF)
Naslov časopisaMaterials
Brojčani podacivol. 17, br. 6, 1419
e-ISSN1996-1944
DOIhttps://doi.org/10.3390/ma17061419
URN:NBNurn:nbn:hr:127:350808
Datum objave publikacije2024-03-20
URL dokumentahttps://www.mdpi.com/1996-1944/17/6/1419
Vrsta resursaTekst
Prava pristupaOtvoreni pristup
Uvjeti korištenjaIkona licence Imenovanje 4.0 međunarodna (CC BY 4.0)
Datum i vrijeme pohrane2024-07-01 07:39:11