prikaz prve stranice dokumenta The Role of Rapid Curing on the Interrelationship Between Temperature Rise, Light Transmission, and Polymerisation Kinetics of Bulk-Fill Composites
  Preuzmi
PDF 2.1 MB
Znanstveni rad - Izvorni znanstveni rad
The Role of Rapid Curing on the Interrelationship Between Temperature Rise, Light Transmission, and Polymerisation Kinetics of Bulk-Fill Composites
International Journal of Molecular Sciences, 26 (2025), 6; 2803. https://doi.org/10.3390/ijms26062803
Marovic, Danijela; Par, Matej; Daničić, Paulina; Marošević, Ana; Bojo, Gloria; Alerić, Marta; Antić, Svenia; Puljić, Krunoslav; Badovinac, Ana; Shortall, Adrian C.; Tarle, Zrinka

Citirajte ovaj rad

Marovic, D., Par, M., Daničić, P., Marošević, A., Bojo, G., Alerić, M. ... Tarle, Z. (2025). The Role of Rapid Curing on the Interrelationship Between Temperature Rise, Light Transmission, and Polymerisation Kinetics of Bulk-Fill Composites. International Journal of Molecular Sciences, 26. (6), 2803. doi: 10.3390/ijms26062803

Marovic, Danijela, et al. "The Role of Rapid Curing on the Interrelationship Between Temperature Rise, Light Transmission, and Polymerisation Kinetics of Bulk-Fill Composites." International Journal of Molecular Sciences, vol. 26, br. 6, 2025, str. 2803. https://doi.org/10.3390/ijms26062803

Marovic, Danijela, Matej Par, Paulina Daničić, Ana Marošević, Gloria Bojo, Marta Alerić, Svenia Antić, et al. "The Role of Rapid Curing on the Interrelationship Between Temperature Rise, Light Transmission, and Polymerisation Kinetics of Bulk-Fill Composites." International Journal of Molecular Sciences 26, br. 6 (2025): 2803. https://doi.org/10.3390/ijms26062803

Marovic, D., et al. (2025) 'The Role of Rapid Curing on the Interrelationship Between Temperature Rise, Light Transmission, and Polymerisation Kinetics of Bulk-Fill Composites', International Journal of Molecular Sciences, 26(6), str. 2803. doi: 10.3390/ijms26062803

Marovic D, Par M, Daničić P, Marošević A, Bojo G, Alerić M, i sur.. The Role of Rapid Curing on the Interrelationship Between Temperature Rise, Light Transmission, and Polymerisation Kinetics of Bulk-Fill Composites. International Journal of Molecular Sciences [Internet]. 20.03.2025. [pristupljeno 11.04.2025.];26(6):2803. doi: 10.3390/ijms26062803

D. Marovic, et al., "The Role of Rapid Curing on the Interrelationship Between Temperature Rise, Light Transmission, and Polymerisation Kinetics of Bulk-Fill Composites", International Journal of Molecular Sciences, vol. 26, br. 6, str. 2803, Ožujak 2025. [Online]. Dostupno na: https://urn.nsk.hr/urn:nbn:hr:127:617327. [Citirano: 11.04.2025.]

Za citiranje koristite ovu mrežnu adresu: https://urn.nsk.hr/urn:nbn:hr:127:617327
Prijavite se u repozitorij kako biste mogli spremiti objekt u svoju listu.
Podaci o radu
Naslov (engleski)The Role of Rapid Curing on the Interrelationship Between Temperature Rise, Light Transmission, and Polymerisation Kinetics of Bulk-Fill Composites
AutorDanijela Marovic
AutorMatej Par
AutorPaulina Daničić
AutorAna Marošević
AutorGloria Bojo
AutorMarta Alerić
AutorSvenia Antić
AutorKrunoslav Puljić
AutorAna Badovinac
AutorAdrian C. Shortall
AutorZrinka Tarle
Autorova ustanova(Klinički bolnički centar Zagreb)
Autorova ustanovaSveučilište u Zagrebu
Ekonomski fakultet
Autorova ustanovaSveučilište u Zagrebu
Stomatološki fakultet
Znanstveno / umjetničko
područje, polje i grana		BIOMEDICINA I ZDRAVSTVO
Dentalna medicina
Sažetak (engleski)
The first seconds of light curing are crucial for the development of most properties of dental composites, especially for the 3s high-irradiance curing. This study investigated the influence of rapid high-irradiance curing on temporal development of temperature, transmittance and conversion of bulk-fill composites. Four materials were tested: Filtek One (FO), Tetric PowerFill (PFill), Tetric PowerFlow (PFlow) and SDR flow+ (SDR+) and cured with three curing units (LCU): Valo Cordles, Bluephase PowerCure and Translux Wave in 3s (3 W/cm2), 10s (1 W/cm2) and 20s (1 W/cm2) curing protocols. Light transmittance was measured at 2 and 4 mm, while temperature rise and polymerisation kinetics were evaluated at 4 mm depth during 5 min. Both light transmittance and temperature rise were greatest for SDR+ > PFlow > PFill > FO. The 20s curing protocol resulted in the highest degree of conversion (DC) for all materials and LCUs, but also contributed to the greatest temperature rise. Rapid curing with the 3s protocol caused the lowest temperature rise and the shortest time to reach maximum temperature. The polymerisation and temperature kinetics were strongly dependent on the material. The DC of PFill was statistically similar for 3s, 10s or 20s curing with BPC. Rapid curing is only recommended for materials developed for this purpose.
Ključne riječi (engleski)
Jezikengleski
Vrsta publikacijeZnanstveni rad - Izvorni znanstveni rad
Status objaveObjavljen
Vrsta recenzijeRecenziran - međunarodna recenzija
Verzija publikacijeObjavljena verzija rada (izdavačev PDF)
Naslov časopisaInternational Journal of Molecular Sciences
Brojčani podacivol. 26, br. 6, str. 2803, 2803
e-ISSN1422-0067
DOIhttps://doi.org/10.3390/ijms26062803
URN:NBNurn:nbn:hr:127:617327
Datum objave publikacije2025-03-20
URL dokumentahttps://www.mdpi.com/1422-0067/26/6/2803
Vrsta resursaTekst
Prava pristupaOtvoreni pristup
Uvjeti korištenjaIkona licence Imenovanje 4.0 međunarodna (CC BY 4.0)
Datum i vrijeme pohrane2025-04-09 08:42:21