prikaz prve stranice dokumenta Tensile Bond Strength between Different Denture Base Materials and Soft Denture Liners
  Preuzmi
PDF 2.52 MB
Znanstveni rad - Izvorni znanstveni rad
Tensile Bond Strength between Different Denture Base Materials and Soft Denture Liners
Materials, 16 (2023), 13; 4615. https://doi.org/10.3390/ma16134615
Vuksic, Josip; Pilipovic, Ana; Poklepovic Pericic, Tina; Kranjcic, Josip

Citirajte ovaj rad

Vuksic, J., Pilipovic, A., Poklepovic Pericic, T. i Kranjcic, J. (2023). Tensile Bond Strength between Different Denture Base Materials and Soft Denture Liners. Materials, 16. (13). doi: 10.3390/ma16134615

Vuksic, Josip, et al. "Tensile Bond Strength between Different Denture Base Materials and Soft Denture Liners." Materials, vol. 16, br. 13, 2023. https://doi.org/10.3390/ma16134615

Vuksic, Josip, Ana Pilipovic, Tina Poklepovic Pericic i Josip Kranjcic. "Tensile Bond Strength between Different Denture Base Materials and Soft Denture Liners." Materials 16, br. 13 (2023). https://doi.org/10.3390/ma16134615

Vuksic, J., et al. (2023) 'Tensile Bond Strength between Different Denture Base Materials and Soft Denture Liners', Materials, 16(13). doi: 10.3390/ma16134615

Vuksic J, Pilipovic A, Poklepovic Pericic T, Kranjcic J. Tensile Bond Strength between Different Denture Base Materials and Soft Denture Liners. Materials [Internet]. 26.06.2023. [pristupljeno 10.03.2025.];16(13). doi: 10.3390/ma16134615

J. Vuksic, A. Pilipovic, T. Poklepovic Pericic i J. Kranjcic, "Tensile Bond Strength between Different Denture Base Materials and Soft Denture Liners", Materials, vol. 16, br. 13, Lipanj 2023. [Online]. Dostupno na: https://urn.nsk.hr/urn:nbn:hr:127:906541. [Citirano: 10.03.2025.]

Za citiranje koristite ovu mrežnu adresu: https://urn.nsk.hr/urn:nbn:hr:127:906541
Prijavite se u repozitorij kako biste mogli spremiti objekt u svoju listu.
Podaci o radu
Naslov (engleski)Tensile Bond Strength between Different Denture Base Materials and Soft Denture Liners
AutorJosip Vuksic
AutorAna Pilipovic
AutorTina Poklepovic Pericic
AutorJosip Kranjcic
Autorova ustanovaSveučilište u Splitu
Medicinski fakultet
Autorova ustanovaSveučilište u Zagrebu
Fakultet strojarstva i brodogradnje
Autorova ustanovaSveučilište u Zagrebu
Stomatološki fakultet
Znanstveno / umjetničko
područje, polje i grana		BIOMEDICINA I ZDRAVSTVO
Dentalna medicina
Sažetak (engleski)
(1) Background: Various materials are available for CAD-CAM denture base fabrication, for both additive and subtractive manufacturing. However, little has been reported on bond strength to soft denture liners. Therefore, the aim of this study was to investigate tensile bond strength, comparing between different denture base materials and soft denture liners. (2) Methods: Seven different materials were used for denture base fabrication: one heat-polymerized polymethyl methacrylate, three materials for subtractive manufacturing, two materials for additive manufacturing and one polyamide. Two materials were used for soft denture lining: one silicone-based and one acrylate-based. The study was conducted according to the specification ISO No. 10139-2:2016, and the type of failure was determined. The Kruskal–Wallis test with Dunn’s post hoc test was used to analyse the values of tensile bond strength, and Fisher’s exact test was used to analyse the type of failure. p Values < 0.05 were considered statistically significant. (3) Results: The tensile bond strength values were not statistically significantly different combining all the materials used for denture base fabrication with the acrylate-based soft denture liner (p > 0.05), and the average values ranged between 0.19 and 0.25 Mpa. The tensile bond strength values of the different denture base materials and silicone-based denture liner were statistically significantly different (p < 0.05), and the average values ranged between 1.49 and 3.07 Mpa. The type of failure was predominantly adhesive between polyamide and both additive-manufactured denture base materials in combination with the acrylate-based soft liner (p < 0.05). (4) Conclusions: The use of digital technologies in denture base fabrication can have an influence on different tensile bond strength values for soft denture liners, with different types of failure when compared with heat-cured PMMA. Similar tensile bond strength values were found between the acrylate-based soft denture liner and denture base materials. Significant differences in tensile bond strength values were found between the silicone-based soft denture liner and denture base materials, where the additive-manufactured and polyamide denture base materials showed lower values than heat-cured PMMA and subtractive-manufactured denture base materials.
Ključne riječi (engleski)
Jezikengleski
Vrsta publikacijeZnanstveni rad - Izvorni znanstveni rad
Status objaveObjavljen
Vrsta recenzijeRecenziran - međunarodna recenzija
Verzija publikacijeObjavljena verzija rada (izdavačev PDF)
Naslov časopisaMaterials
Brojčani podacivol. 16, br. 13, 4615
e-ISSN1996-1944
DOIhttps://doi.org/10.3390/ma16134615
URN:NBNurn:nbn:hr:127:906541
Datum objave publikacije2023-06-26
URL dokumentahttps://www.mdpi.com/1996-1944/16/13/4615
Vrsta resursaTekst
Prava pristupaOtvoreni pristup
Uvjeti korištenjaIkona licence Imenovanje 4.0 međunarodna (CC BY 4.0)
Datum i vrijeme pohrane2025-03-10 09:30:16