prikaz prve stranice dokumenta Shear Bond Strength of Orthodontic Brackets Bonded with Thermo-Cured Glass-Based Materials—An In Vitro Study
  Preuzmi
PDF 612.24 KB
Znanstveni rad - Izvorni znanstveni rad
Shear Bond Strength of Orthodontic Brackets Bonded with Thermo-Cured Glass-Based Materials—An In Vitro Study
Materials, 17 (2024), 13; 3090. https://doi.org/10.3390/ma17133090
Cvitanović, Stipo; Zovko, Ružica; Mabić, Mirela; Jurišić, Sanja; Jelić-Knezović, Nevenka; Glavina, Domagoj; Goršeta, Kristina

Citirajte ovaj rad

Cvitanović, S., Zovko, R., Mabić, M., Jurišić, S., Jelić Knezović, N., Glavina, D. i Goršeta, K. (2024). Shear Bond Strength of Orthodontic Brackets Bonded with Thermo-Cured Glass-Based Materials—An In Vitro Study. Materials, 17. (13). doi: 10.3390/ma17133090

Cvitanović, Stipo, et al. "Shear Bond Strength of Orthodontic Brackets Bonded with Thermo-Cured Glass-Based Materials—An In Vitro Study." Materials, vol. 17, br. 13, 2024. https://doi.org/10.3390/ma17133090

Cvitanović, Stipo, Ružica Zovko, Mirela Mabić, Sanja Jurišić, Nevenka Jelić Knezović, Domagoj Glavina i Kristina Goršeta. "Shear Bond Strength of Orthodontic Brackets Bonded with Thermo-Cured Glass-Based Materials—An In Vitro Study." Materials 17, br. 13 (2024). https://doi.org/10.3390/ma17133090

Cvitanović, S., et al. (2024) 'Shear Bond Strength of Orthodontic Brackets Bonded with Thermo-Cured Glass-Based Materials—An In Vitro Study', Materials, 17(13). doi: 10.3390/ma17133090

Cvitanović S, Zovko R, Mabić M, Jurišić S, Jelić Knezović N, Glavina D, i sur.. Shear Bond Strength of Orthodontic Brackets Bonded with Thermo-Cured Glass-Based Materials—An In Vitro Study. Materials [Internet]. 24.06.2024. [pristupljeno 08.12.2024.];17(13). doi: 10.3390/ma17133090

S. Cvitanović, et al., "Shear Bond Strength of Orthodontic Brackets Bonded with Thermo-Cured Glass-Based Materials—An In Vitro Study", Materials, vol. 17, br. 13, Lipanj 2024. [Online]. Dostupno na: https://urn.nsk.hr/urn:nbn:hr:127:511963. [Citirano: 08.12.2024.]

Za citiranje koristite ovu mrežnu adresu: https://urn.nsk.hr/urn:nbn:hr:127:511963
Prijavite se u repozitorij kako biste mogli spremiti objekt u svoju listu.
Podaci o radu
Naslov (engleski)Shear Bond Strength of Orthodontic Brackets Bonded with Thermo-Cured Glass-Based Materials—An In Vitro Study
AutorStipo Cvitanović
AutorRužica Zovko
AutorMirela Mabić
AutorSanja Jurišić
AutorNevenka Jelić-Knezović
AutorDomagoj Glavina
AutorKristina Goršeta
Autorova ustanova(Klinički bolnički centar Zagreb)
Autorova ustanovaSveučilište u Zagrebu
Stomatološki fakultet
Znanstveno / umjetničko
područje, polje i grana		BIOMEDICINA I ZDRAVSTVO
Dentalna medicina
Sažetak (engleski)
The results of orthodontic therapy largely depend, among other factors, on the preparation of the tooth enamel itself and the choice of material used to bond orthodontic brackets. The aim of this in vitro study was to determine the shear bond strength (SBS) and adhesive remnant index (ARI) score of thermo-cured glass–ionomers on different pretreated enamel, in comparison with the commonly used composite cement. Three commercially available nano-ionomer or highly viscous glass–ionomer cements (EQUIA Forte® Fil, EQUIA Fil, Ketac Universal) and two types of compo-sites (Heliosit Orthodontic, ConTec Go!) were investigated in this study. The research involved two hundred human premolars. The teeth were cleaned and polished, then randomly divided into five groups according to the enamel preparation method and the type of material. The enamel was treated in three different ways: polyacrylic acid, phosphoric acid, 5% NaOCl + etching with phosphoric acid, and a control group without treatment. Glass–ionomer cement was thermo-cured with heat from a polymerization unit during setting. Statistical analysis was performed using a Chi-square test and one-way ANOVA for independent samples. Spearman’s Rho correlation coefficient was used to examine the relationship. Regardless of the material type, the results indicated that the weakest bond between the bracket and tooth enamel was found in samples without enamel pretreatment. The majority of the materials stayed on the brackets in samples without enamel preparation, according to ARI scores. The study’s findings demonstrated that the strength of the adhesion between the bracket and enamel is greatly influenced by enamel etching and glass–ionomer thermo-curing. Clinical investigations would be required to validate the outcomes.
Ključne riječi (engleski)
Jezikengleski
Vrsta publikacijeZnanstveni rad - Izvorni znanstveni rad
Status objaveObjavljen
Vrsta recenzijeRecenziran - međunarodna recenzija
Verzija publikacijeObjavljena verzija rada (izdavačev PDF)
Naslov časopisaMaterials
Brojčani podacivol. 17, br. 13, 3090
e-ISSN1996-1944
DOIhttps://doi.org/10.3390/ma17133090
URN:NBNurn:nbn:hr:127:511963
Datum objave publikacije2024-06-24
URL dokumentahttps://www.mdpi.com/1996-1944/17/13/3090
Vrsta resursaTekst
Prava pristupaOtvoreni pristup
Uvjeti korištenjaIkona licence Imenovanje 4.0 međunarodna (CC BY 4.0)
Datum i vrijeme pohrane2024-09-19 07:58:35