prikaz prve stranice dokumenta Flexural Strength and Morphological Study of Different Multilayer Zirconia Dental Materials
  Preuzmi
PDF 1.71 MB
Znanstveni rad - Izvorni znanstveni rad
Flexural Strength and Morphological Study of Different Multilayer Zirconia Dental Materials
Materials, 17 (2024), 5; 1143. https://doi.org/10.3390/ma17051143
Labetić, Andrea; Klaser, Teodoro; Skoko, Željko; Jakovac, Marko; Žic, Mark

Citirajte ovaj rad

Labetić, A., Klaser, T., Skoko, Ž., Jakovac, M. i Žic, M. (2024). Flexural Strength and Morphological Study of Different Multilayer Zirconia Dental Materials. Materials, 17. (5). doi: 10.3390/ma17051143

Labetić, Andrea, et al. "Flexural Strength and Morphological Study of Different Multilayer Zirconia Dental Materials." Materials, vol. 17, br. 5, 2024. https://doi.org/10.3390/ma17051143

Labetić, Andrea, Teodoro Klaser, Željko Skoko, Marko Jakovac i Mark Žic. "Flexural Strength and Morphological Study of Different Multilayer Zirconia Dental Materials." Materials 17, br. 5 (2024). https://doi.org/10.3390/ma17051143

Labetić, A., et al. (2024) 'Flexural Strength and Morphological Study of Different Multilayer Zirconia Dental Materials', Materials, 17(5). doi: 10.3390/ma17051143

Labetić A, Klaser T, Skoko Ž, Jakovac M, Žic M. Flexural Strength and Morphological Study of Different Multilayer Zirconia Dental Materials. Materials [Internet]. 01.03.2024. [pristupljeno 10.12.2024.];17(5). doi: 10.3390/ma17051143

A. Labetić, T. Klaser, Ž. Skoko, M. Jakovac i M. Žic, "Flexural Strength and Morphological Study of Different Multilayer Zirconia Dental Materials", Materials, vol. 17, br. 5, Ožujak 2024. [Online]. Dostupno na: https://urn.nsk.hr/urn:nbn:hr:127:395500. [Citirano: 10.12.2024.]

Za citiranje koristite ovu mrežnu adresu: https://urn.nsk.hr/urn:nbn:hr:127:395500
Prijavite se u repozitorij kako biste mogli spremiti objekt u svoju listu.
Podaci o radu
Naslov (engleski)Flexural Strength and Morphological Study of Different Multilayer Zirconia Dental Materials
AutorAndrea Labetić
AutorTeodoro Klaser
AutorŽeljko Skoko
AutorMarko Jakovac
AutorMark Žic
Autorova ustanovaInstitut Ruđer Bošković
Autorova ustanovaSveučilište u Zagrebu
Prirodoslovno-matematički fakultet
Autorova ustanovaSveučilište u Zagrebu
Stomatološki fakultet
Znanstveno / umjetničko
područje, polje i grana		BIOMEDICINA I ZDRAVSTVO
Dentalna medicina
Sažetak (engleski)
Nowadays, yttria (Y3+)-stabilized ZrO2 (Y-TZP) is the most commonly used material in dental prosthetics. Y-TZP dental ceramics are mainly stabilized via the addition of 3 mol% yttrium oxide (Y2O3). These ceramics exhibit excellent mechanical properties, including high flexural strength, fracture toughness, elastic modulus, etc. Some manufacturers have recently introduced a new class of dental materials with multilayer composition with the aim of combining the advantages of adding more or less Y2O3 to the ceramic composition in one Y-TZP material. The flexural strength values of multilayer Y-TZP may vary depending on the dimensions of the specimen, layer distributions, and especially the layer exposed on the maximum tension side, i.e., loading configuration. Although previous studies have examined the flexural strength of separate Y-TZP layers, capturing the flexural strength of multilayer Y-TZP is still challenging. However, one should keep in mind that multilayer flexural strength is important for clinical indications. The objective of this study is to compare the flexural strength of three distinct multilayer translucent Y-TZP materials made up of layers with different Y3+ contents. Rectangular samples (2 mm × 2 mm × 16 mm) were prepared from CAD/CAM discs using the milling machine Programill PM7 (Ivoclar Vivadent AG). Milled bars were tested for flexural strength in a three-point bending test (ISO 6872:2015) using a universal testing machine (Inspekt Duo 5kN; Hegewald & Peschke, Nossen, Germany) at a crosshead speed of 0.5 mm/min. Representative samples of each type of material were selected for quantitative and qualitative analysis of the microstructure. Representative samples of each type of material were selected for structural, mechanical, and microstructural analyses.
Ključne riječi (engleski)
Jezikengleski
Vrsta publikacijeZnanstveni rad - Izvorni znanstveni rad
Status objaveObjavljen
Vrsta recenzijeRecenziran - međunarodna recenzija
Verzija publikacijeObjavljena verzija rada (izdavačev PDF)
Naslov časopisaMaterials
Brojčani podacivol. 17, br. 5, 1143
e-ISSN1996-1944
DOIhttps://doi.org/10.3390/ma17051143
URN:NBNurn:nbn:hr:127:395500
Datum objave publikacije2024-03-01
URL dokumentahttps://www.mdpi.com/1996-1944/17/5/1143
Vrsta resursaTekst
Prava pristupaOtvoreni pristup
Uvjeti korištenjaIkona licence Imenovanje 4.0 međunarodna (CC BY 4.0)
Datum i vrijeme pohrane2024-07-01 07:55:21