prikaz prve stranice dokumenta Bulk Fill Composites Have Similar Performance to Conventional Dental Composites
  Preuzmi
PDF NAN bytes
Znanstveni rad - Izvorni znanstveni rad
Bulk Fill Composites Have Similar Performance to Conventional Dental Composites
International Journal of Molecular Sciences, 21 (2020), 14; 5136. https://doi.org/10.3390/ijms21145136
Haugen, Håvard J.; Marović, Danijela; Par, Matej; Khai Le Thieu, Minh; Reseland, Janne E.; Johnsen, Gaute Floer

Citirajte ovaj rad

Haugen, H. J., Marović, D., Par, M., Khai Le Thieu, M., Reseland, J. E. i Johnsen, G. F. (2020). Bulk Fill Composites Have Similar Performance to Conventional Dental Composites. International Journal of Molecular Sciences, 21. (14). doi: 10.3390/ijms21145136

Haugen, Håvard J., et al. "Bulk Fill Composites Have Similar Performance to Conventional Dental Composites." International Journal of Molecular Sciences, vol. 21, br. 14, 2020. https://doi.org/10.3390/ijms21145136

Haugen, Håvard J., Danijela Marović, Matej Par, Minh Khai Le Thieu, Janne E. Reseland i Gaute Floer Johnsen. "Bulk Fill Composites Have Similar Performance to Conventional Dental Composites." International Journal of Molecular Sciences 21, br. 14 (2020). https://doi.org/10.3390/ijms21145136

Haugen, H. J., et al. (2020) 'Bulk Fill Composites Have Similar Performance to Conventional Dental Composites', International Journal of Molecular Sciences, 21(14). doi: 10.3390/ijms21145136

Haugen HJ, Marović D, Par M, Khai Le Thieu M, Reseland JE, Johnsen GF. Bulk Fill Composites Have Similar Performance to Conventional Dental Composites. International Journal of Molecular Sciences [Internet]. 20.07.2020. [pristupljeno 21.04.2024.];21(14). doi: 10.3390/ijms21145136

H. J. Haugen, D. Marović, M. Par, M. Khai Le Thieu, J. E. Reseland i G. F. Johnsen, "Bulk Fill Composites Have Similar Performance to Conventional Dental Composites", International Journal of Molecular Sciences, vol. 21, br. 14, Srpanj 2020. [Online]. Dostupno na: https://urn.nsk.hr/urn:nbn:hr:127:101562. [Citirano: 21.04.2024.]

Za citiranje koristite ovu mrežnu adresu: https://urn.nsk.hr/urn:nbn:hr:127:101562
Prijavite se u repozitorij kako biste mogli spremiti objekt u svoju listu.
Podaci o radu
Naslov (engleski)Bulk Fill Composites Have Similar Performance to Conventional Dental Composites
AutorHåvard J. Haugen
AutorDanijela Marović
AutorMatej Par
AutorMinh Khai Le Thieu
AutorJanne E. Reseland
AutorGaute Floer Johnsen
Autorova ustanovaSveučilište u Zagrebu
Stomatološki fakultet
Znanstveno / umjetničko
područje, polje i grana		BIOMEDICINA I ZDRAVSTVO
Dentalna medicina
Endodoncija i restaurativna dentalna medicina
Sažetak (engleski)
The aim of the study was to perform comprehensive characterization of two commonly used bulk fill composite materials (SDR Flow (SDR) and Filtek™ Bulk Fill Flowable Restorative (FBF) and one conventional composite material (Tetric EvoCeram; TEC). Eleven parameters were examined: flexural strength (FS), flexural modulus (FM), degree of conversion, depth of cure, polymerisation shrinkage (PS), filler particle morphology, filler mass fraction, Vickers hardness, surface roughness following simulated toothbrush abrasion, monomer elution, and cytotoxic reaction of human gingival fibroblasts, osteoblasts, and cancer cells. The degree of conversion and depth of cure were the highest for SDR, followed by FBF and TEC, but there was no difference in PS between them. FS was higher for bulk fill materials, while their FM and hardness were lower than those of TEC. Surface roughness decreased in the order TEC→SDR→FBF. Bisphenol A-glycidyl methacrylate (BisGMA) and urethane dimethacrylate were found in TEC and FBF eluates, while SDR released BisGMA and triethylene glycol dimethacrylate. Conditioned media accumulated for 24 h from FBF and TEC were cytotoxic to primary human osteoblasts. Compared to the conventional composite, the tested bulk fill materials performed equally or better in most of the tests, except for their hardness, elastic modulus, and biocompatibility with osteoblasts.
Ključne riječi (engleski)
Jezikengleski
Vrsta publikacijeZnanstveni rad - Izvorni znanstveni rad
Status objaveObjavljen
Vrsta recenzijeRecenziran - međunarodna recenzija
Verzija publikacijeObjavljena verzija rada (izdavačev PDF)
Naslov časopisaInternational Journal of Molecular Sciences
Brojčani podacivol. 21, br. 14, 5136
e-ISSN1422-0067
DOIhttps://doi.org/10.3390/ijms21145136
URN:NBNurn:nbn:hr:127:101562
Datum objave publikacije2020-07-20
URL dokumentahttps://www.mdpi.com/1422-0067/21/14/5136
Vrsta resursaTekst
Prava pristupaOtvoreni pristup
Uvjeti korištenjaIkona licence Imenovanje 4.0 međunarodna (CC BY 4.0)
Datum i vrijeme pohrane2022-11-10 12:59:44