prikaz prve stranice dokumenta Mechanical Properties of Glass Ionomer Cements after Incorporation of Marine Derived Hydroxyapatite
  Preuzmi
PDF 2.15 MB
Znanstveni rad - Izvorni znanstveni rad
Mechanical Properties of Glass Ionomer Cements after Incorporation of Marine Derived Hydroxyapatite
Materials, 13 (2020), 16; 3542. https://doi.org/10.3390/ma13163542
Bilić-Prcić, Maja; Rajić, Valentina Brzović; Ivanišević, Ana; Pilipović, Ana; Gurgan, Sevil; Miletić, Ivana

Citirajte ovaj rad

Bilić Prcić, M., Rajić, V. B., Ivanišević, A., Pilipović, A., Gurgan, S. i Miletić, I. (2020). Mechanical Properties of Glass Ionomer Cements after Incorporation of Marine Derived Hydroxyapatite. Materials, 13. (16). doi: 10.3390/ma13163542

Bilić Prcić, Maja, et al. "Mechanical Properties of Glass Ionomer Cements after Incorporation of Marine Derived Hydroxyapatite." Materials, vol. 13, br. 16, 2020. https://doi.org/10.3390/ma13163542

Bilić Prcić, Maja, Valentina Brzović Rajić, Ana Ivanišević, Ana Pilipović, Sevil Gurgan i Ivana Miletić. "Mechanical Properties of Glass Ionomer Cements after Incorporation of Marine Derived Hydroxyapatite." Materials 13, br. 16 (2020). https://doi.org/10.3390/ma13163542

Bilić Prcić, M., et al. (2020) 'Mechanical Properties of Glass Ionomer Cements after Incorporation of Marine Derived Hydroxyapatite', Materials, 13(16). doi: 10.3390/ma13163542

Bilić Prcić M, Rajić VB, Ivanišević A, Pilipović A, Gurgan S, Miletić I. Mechanical Properties of Glass Ionomer Cements after Incorporation of Marine Derived Hydroxyapatite. Materials [Internet]. 11.08.2020. [pristupljeno 16.04.2024.];13(16). doi: 10.3390/ma13163542

M. Bilić Prcić, V. B. Rajić, A. Ivanišević, A. Pilipović, S. Gurgan i I. Miletić, "Mechanical Properties of Glass Ionomer Cements after Incorporation of Marine Derived Hydroxyapatite", Materials, vol. 13, br. 16, Kolovoz 2020. [Online]. Dostupno na: https://urn.nsk.hr/urn:nbn:hr:127:860877. [Citirano: 16.04.2024.]

Za citiranje koristite ovu mrežnu adresu: https://urn.nsk.hr/urn:nbn:hr:127:860877
Prijavite se u repozitorij kako biste mogli spremiti objekt u svoju listu.
Podaci o radu
Naslov (engleski)Mechanical Properties of Glass Ionomer Cements after Incorporation of Marine Derived Hydroxyapatite
AutorMaja Bilić-Prcić
AutorValentina Brzović Rajić
AutorAna Ivanišević
AutorAna Pilipović
AutorSevil Gurgan
AutorIvana Miletić
Autorova ustanova(Klinički bolnički centar Zagreb)
Autorova ustanovaSveučilište u Zagrebu
Fakultet strojarstva i brodogradnje
Autorova ustanovaSveučilište u Zagrebu
Stomatološki fakultet
Znanstveno / umjetničko
područje, polje i grana		BIOMEDICINA I ZDRAVSTVO
Dentalna medicina
Sažetak (engleski)
The purpose of this study was to evaluate the effects of the incorporation of hydroxyapatite (HA) derived from cuttlefish bone on the mechanical properties of glass ionomer cements (GIC). Fuji II LC and Fuji IX GP Extra (GC Corporation, Tokyo, Japan) were used in the study. There were four groups (n = 11–18) for each material: a group without the addition of HA particles and three groups modified by incorporation of 2, 5, and 10 wt% HA. The tests were performed on a universal testing machine (Shimadzu, Duisburg, Germany) and descriptive statistics, two-way analysis of variance (ANOVA) for the comparison of three mechanical properties, and one-way ANOVA for the comparison of different concentrations for each material were performed. Regarding the Fuji IX groups, compressive strength (CS) and flexural strength (FS) were highest in the group without HA particles added. The differences in CS between the Fuji IX group without HA particles and the Fuji IX groups with 2 wt% HA and 10 wt% HA were significant. The Fuji II 5 wt% HA group exhibited higher diametral tensile strength (DTS) and CS than other Fuji II groups, but not significantly. The Fuji II group, modified with 10 wt% HA, exhibited significantly higher FS than the Fuji II group without HA particles (p < 0.05). Porous HA incorporated into the Fuji IX groups had a significant impact on mechanical properties only in the Fuji IX 5 wt% HA group. Fuji II groups modified with 10 wt% HA showed the most favorable results with respect to FS.
Ključne riječi (engleski)
Jezikengleski
Vrsta publikacijeZnanstveni rad - Izvorni znanstveni rad
Status objaveObjavljen
Vrsta recenzijeRecenziran - međunarodna recenzija
Verzija publikacijeObjavljena verzija rada (izdavačev PDF)
Naslov časopisaMaterials
Brojčani podacivol. 13, br. 16, 3542
e-ISSN1996-1944
DOIhttps://doi.org/10.3390/ma13163542
URN:NBNurn:nbn:hr:127:860877
Datum objave publikacije2020-08-11
URL dokumentahttps://www.mdpi.com/1996-1944/13/16/3542
Vrsta resursaTekst
Prava pristupaOtvoreni pristup
Uvjeti korištenjaIkona licence Imenovanje 4.0 međunarodna (CC BY 4.0)
Datum i vrijeme pohrane2022-11-10 12:54:24