prikaz prve stranice dokumenta Short- and Long-Term Dentin Bond Strength of Bioactive Glass-Modified Dental Adhesives
  Preuzmi
PDF 975.29 KB
Znanstveni rad - Izvorni znanstveni rad
Short- and Long-Term Dentin Bond Strength of Bioactive Glass-Modified Dental Adhesives
Nanomaterials, 11 (2021), 8; 1894. https://doi.org/10.3390/nano11081894
Oltramare, Ramona; Par, Matej; Mohn, Dirk; Wiedemeier, Daniel B.; Attin, Thomas; Tauböck, Tobias T.

Citirajte ovaj rad

Oltramare, R., Par, M., Mohn, D., Wiedemeier, D. B., Attin, T. i Tauböck, T. T. (2021). Short- and Long-Term Dentin Bond Strength of Bioactive Glass-Modified Dental Adhesives. Nanomaterials, 11. (8). doi: 10.3390/nano11081894

Oltramare, Ramona, et al. "Short- and Long-Term Dentin Bond Strength of Bioactive Glass-Modified Dental Adhesives." Nanomaterials, vol. 11, br. 8, 2021. https://doi.org/10.3390/nano11081894

Oltramare, Ramona, Matej Par, Dirk Mohn, Daniel B. Wiedemeier, Thomas Attin i Tobias T. Tauböck. "Short- and Long-Term Dentin Bond Strength of Bioactive Glass-Modified Dental Adhesives." Nanomaterials 11, br. 8 (2021). https://doi.org/10.3390/nano11081894

Oltramare, R., et al. (2021) 'Short- and Long-Term Dentin Bond Strength of Bioactive Glass-Modified Dental Adhesives', Nanomaterials, 11(8). doi: 10.3390/nano11081894

Oltramare R, Par M, Mohn D, Wiedemeier DB, Attin T, Tauböck TT. Short- and Long-Term Dentin Bond Strength of Bioactive Glass-Modified Dental Adhesives. Nanomaterials [Internet]. 23.07.2021. [pristupljeno 06.01.2025.];11(8). doi: 10.3390/nano11081894

R. Oltramare, M. Par, D. Mohn, D. B. Wiedemeier, T. Attin i T. T. Tauböck, "Short- and Long-Term Dentin Bond Strength of Bioactive Glass-Modified Dental Adhesives", Nanomaterials, vol. 11, br. 8, Srpanj 2021. [Online]. Dostupno na: https://urn.nsk.hr/urn:nbn:hr:127:044052. [Citirano: 06.01.2025.]

Za citiranje koristite ovu mrežnu adresu: https://urn.nsk.hr/urn:nbn:hr:127:044052
Prijavite se u repozitorij kako biste mogli spremiti objekt u svoju listu.
Podaci o radu
Naslov (engleski)Short- and Long-Term Dentin Bond Strength of Bioactive Glass-Modified Dental Adhesives
AutorRamona Oltramare
AutorMatej Par
AutorDirk Mohn
AutorDaniel B. Wiedemeier
AutorThomas Attin
AutorTobias T. Tauböck
Autorova ustanovaSveučilište u Zagrebu
Stomatološki fakultet
Znanstveno / umjetničko
područje, polje i grana		BIOMEDICINA I ZDRAVSTVO
Dentalna medicina
Endodoncija i restaurativna dentalna medicina
Sažetak (engleski)
This study investigated the short- and long-term effects of dental adhesives doped with nano-sized bioactive glass 45S5 (BAG) on the resin–dentin interfacial bond strength. Two etch-and-rinse adhesives (Adper Scotchbond Multi-Purpose (ASB) and Solobond Plus (SB)) and one self-etch adhesive (Clearfil SE Bond (CF)) were doped with different concentrations of BAG (5, 10, and 20 wt%). The unmodified (0 wt% BAG) commercial adhesives served as control groups. Dentin of 120 molars (n = 10 per group) was treated with the different adhesives, followed by buildups with a conventional composite restorative material. From each tooth, 14 sticks were prepared for micro-tensile bond strength (µTBS) testing. The sticks were stored in simulated body fluid at 37 °C and tested after 24 h or six months for µTBS and failure mode. Data were analyzed using Kruskal–Wallis tests in combination with post-hoc Conover-tests and Wilcoxon signed-rank tests at a level of significance of α = 0.05. After 24 h and six months, both etch-and-rinse adhesives with a low BAG content (up to 10 wt% for ASB and 5 wt% for SB) showed similar µTBSs as their respective control groups (0 wt% BAG). CF showed a significant decrease in µTBS even after addition of 5 wt% BAG. At a high concentration of added BAG (20 wt%), all three adhesives showed a significant decrease in µTBS compared to the unmodified controls. The CF control group showed significantly lower µTBS after 6 months of storage than after 24 h. In contrast, the µTBS of all CF groups modified with BAG was unaffected by aging. In conclusion, the tested etch-and-rinse adhesives can be modified with up to 5 wt% (SB), or 10 wt% (ASB) of BAG without reducing their short- and long-term dentin bond strength. Moreover, the addition of nano-sized BAG may prevent long-term bond strength deterioration of a self-etch adhesive.
Ključne riječi (engleski)
Jezikengleski
Vrsta publikacijeZnanstveni rad - Izvorni znanstveni rad
Status objaveObjavljen
Vrsta recenzijeRecenziran - međunarodna recenzija
Verzija publikacijeObjavljena verzija rada (izdavačev PDF)
Naslov časopisaNanomaterials
Brojčani podacivol. 11, br. 8, 1894
e-ISSN2079-4991
DOIhttps://doi.org/10.3390/nano11081894
URN:NBNurn:nbn:hr:127:044052
Datum objave publikacije2021-07-23
URL dokumentahttps://www.mdpi.com/2079-4991/11/8/1894
Vrsta resursaTekst
Prava pristupaOtvoreni pristup
Uvjeti korištenjaIkona licence Imenovanje 4.0 međunarodna (CC BY 4.0)
Datum i vrijeme pohrane2022-11-07 11:29:57