prikaz prve stranice dokumenta Sealing Efficacy of the Original and Third-Party Custom-Made Abutments—Microbiological In Vitro Pilot Study
  Preuzmi
PDF 2.77 MB
Znanstveni rad - Izvorni znanstveni rad
Sealing Efficacy of the Original and Third-Party Custom-Made Abutments—Microbiological In Vitro Pilot Study
Materials, 15 (2022), 4; 1597. https://doi.org/10.3390/ma15041597
Smojver, Igor; Bjelica, Roko; Ćatić, Amir; Budimir, Ana; Vuletić, Marko; Gabrić, Dragana

Citirajte ovaj rad

Smojver, I., Bjelica, R., Ćatić, A., Budimir, A., Vuletić, M. i Gabrić, D. (2022). Sealing Efficacy of the Original and Third-Party Custom-Made Abutments—Microbiological In Vitro Pilot Study. Materials, 15. (4). doi: 10.3390/ma15041597

Smojver, Igor, et al. "Sealing Efficacy of the Original and Third-Party Custom-Made Abutments—Microbiological In Vitro Pilot Study." Materials, vol. 15, br. 4, 2022. https://doi.org/10.3390/ma15041597

Smojver, Igor, Roko Bjelica, Amir Ćatić, Ana Budimir, Marko Vuletić i Dragana Gabrić. "Sealing Efficacy of the Original and Third-Party Custom-Made Abutments—Microbiological In Vitro Pilot Study." Materials 15, br. 4 (2022). https://doi.org/10.3390/ma15041597

Smojver, I., et al. (2022) 'Sealing Efficacy of the Original and Third-Party Custom-Made Abutments—Microbiological In Vitro Pilot Study', Materials, 15(4). doi: 10.3390/ma15041597

Smojver I, Bjelica R, Ćatić A, Budimir A, Vuletić M, Gabrić D. Sealing Efficacy of the Original and Third-Party Custom-Made Abutments—Microbiological In Vitro Pilot Study. Materials [Internet]. 21.02.2022. [pristupljeno 14.11.2024.];15(4). doi: 10.3390/ma15041597

I. Smojver, R. Bjelica, A. Ćatić, A. Budimir, M. Vuletić i D. Gabrić, "Sealing Efficacy of the Original and Third-Party Custom-Made Abutments—Microbiological In Vitro Pilot Study", Materials, vol. 15, br. 4, Veljača 2022. [Online]. Dostupno na: https://urn.nsk.hr/urn:nbn:hr:127:421242. [Citirano: 14.11.2024.]

Za citiranje koristite ovu mrežnu adresu: https://urn.nsk.hr/urn:nbn:hr:127:421242
Prijavite se u repozitorij kako biste mogli spremiti objekt u svoju listu.
Podaci o radu
Naslov (engleski)Sealing Efficacy of the Original and Third-Party Custom-Made Abutments—Microbiological In Vitro Pilot Study
AutorIgor Smojver
AutorRoko Bjelica
AutorAmir Ćatić
AutorAna Budimir
AutorMarko Vuletić
AutorDragana Gabrić
Autorova ustanovaSveučilište u Zagrebu
Medicinski fakultet
Autorova ustanovaSveučilište u Zagrebu
Stomatološki fakultet
Znanstveno / umjetničko
područje, polje i grana		BIOMEDICINA I ZDRAVSTVO
Dentalna medicina
Sažetak (engleski)
Implant–abutment connection (IAC) is a key factor for the long-term success and stability of implant-supported prosthodontic restoration and its surrounding tissues. Misfit between prosthodontic abutment and implant at the IAC leads to technical and biological complications. Two kinds of prosthodontic abutments are currently available on the market: original and third-party abutments. The aim of this pilot study was to test and compare the internal fit (gap) at the implant–abutment interface depending on the abutment fabrication method based on microbial leakage in static conditions and the need for the use of gap sealing material. Two groups of 40 implants were formed on the basis of the type of abutment. In each of the groups of two implant systems, two subgroups of 10 implants were formed. The tested subgroups consisted of 10 implants with sealing material and a negative control subgroups consisting of 10 implants without any sealing material. The test material, GapSeal (Hager and Werken, Duisburg, Germany) was applied in the test subgroups. The implant–abutment assemblies were contaminated with a solution containing Staphylococcus aureus and Candida albicans for 14 days under aerobic conditions. Results showed that there was no statistically significant difference regarding the microbial leakage between the original and third-party custom-made abutments, regardless of the use of sealing material. It can be concluded that the abutment fabrication method has no significant influence on sealing efficacy regarding the bacterial and fungal leakage in static conditions.
Ključne riječi (engleski)
Jezikengleski
Vrsta publikacijeZnanstveni rad - Izvorni znanstveni rad
Status objaveObjavljen
Vrsta recenzijeRecenziran - međunarodna recenzija
Verzija publikacijeObjavljena verzija rada (izdavačev PDF)
Naslov časopisaMaterials
Brojčani podacivol. 15, br. 4, 1597
e-ISSN1996-1944
DOIhttps://doi.org/10.3390/ma15041597
URN:NBNurn:nbn:hr:127:421242
Datum objave publikacije2022-02-21
URL dokumentahttps://www.mdpi.com/1996-1944/15/4/1597
Vrsta resursaTekst
Prava pristupaOtvoreni pristup
Uvjeti korištenjaIkona licence Imenovanje 4.0 međunarodna (CC BY 4.0)
Datum i vrijeme pohrane2022-11-03 11:17:46