prikaz prve stranice dokumenta Resistance of PETG Materials on Thermocycling and Brushing
  Preuzmi
PDF 1.86 MB
Znanstveni rad - Izvorni znanstveni rad
Resistance of PETG Materials on Thermocycling and Brushing
Dentistry Journal, 11 (2023), 5; 135. https://doi.org/10.3390/dj11050135
Šimunović, Luka; Blagec, Tadeja; Meštrović, Senka

Citirajte ovaj rad

Šimunović, L., Blagec, T. i Meštrović, S. (2023). Resistance of PETG Materials on Thermocycling and Brushing. Dentistry Journal, 11. (5). doi: 10.3390/dj11050135

Šimunović, Luka, et al. "Resistance of PETG Materials on Thermocycling and Brushing." Dentistry Journal, vol. 11, br. 5, 2023. https://doi.org/10.3390/dj11050135

Šimunović, Luka, Tadeja Blagec i Senka Meštrović. "Resistance of PETG Materials on Thermocycling and Brushing." Dentistry Journal 11, br. 5 (2023). https://doi.org/10.3390/dj11050135

Šimunović, L., Blagec, T. i Meštrović, S. (2023) 'Resistance of PETG Materials on Thermocycling and Brushing', Dentistry Journal, 11(5). doi: 10.3390/dj11050135

Šimunović L, Blagec T, Meštrović S. Resistance of PETG Materials on Thermocycling and Brushing. Dentistry Journal [Internet]. 16.05.2023. [pristupljeno 10.03.2025.];11(5). doi: 10.3390/dj11050135

L. Šimunović, T. Blagec i S. Meštrović, "Resistance of PETG Materials on Thermocycling and Brushing", Dentistry Journal, vol. 11, br. 5, Svibanj 2023. [Online]. Dostupno na: https://urn.nsk.hr/urn:nbn:hr:127:523775. [Citirano: 10.03.2025.]

Za citiranje koristite ovu mrežnu adresu: https://urn.nsk.hr/urn:nbn:hr:127:523775
Prijavite se u repozitorij kako biste mogli spremiti objekt u svoju listu.
Podaci o radu
Naslov (engleski)Resistance of PETG Materials on Thermocycling and Brushing
AutorLuka Šimunović
AutorTadeja Blagec
AutorSenka Meštrović
Autorova ustanova(Klinički bolnički centar Zagreb)
Autorova ustanovaSveučilište u Zagrebu
Stomatološki fakultet
Znanstveno / umjetničko
područje, polje i grana		BIOMEDICINA I ZDRAVSTVO
Dentalna medicina
Sažetak (engleski)
The aim was to assess the impact of thermocycling and brushing on the surface roughness and mass of PETG material—the most commonly used for orthodontic retainers. A total of 96 specimens were exposed to thermocycling and brushing with three different kinds of toothbrushes depending on the number and thickness of the bristles. Surface roughness and mass were evaluated three times: initially, after thermocycling, and after brushing. In all four brands, both thermocycling and brushing increased surface roughness significantly (p < 0.001), with Biolon having the lowest and Track A having the highest. In terms of brushing, only Biolon samples showed statistically significant increased roughness after brushing with all three types of brushes, in comparison to Erkodur A1, where differences were not statistically significant. Thermocycling increased the mass of all samples, but a statistically significant difference was found only in Biolon (p = 0.0203), while after brushing, decreased mass was found in all specimens, statistically significant only in Essix C+ (CS 1560: p = 0.016). PETG material showed instability when exposed to external influences- thermocycling produced an increase in roughness and mass, and brushing mostly caused an increase in roughness and decrease in mass. Erkodur A1 demonstrated the greatest stability, whereas Biolon demonstrated the lowest.
Ključne riječi (engleski)
Jezikengleski
Vrsta publikacijeZnanstveni rad - Izvorni znanstveni rad
Status objaveObjavljen
Vrsta recenzijeRecenziran - međunarodna recenzija
Verzija publikacijeObjavljena verzija rada (izdavačev PDF)
Naslov časopisaDentistry Journal
Brojčani podacivol. 11, br. 5, 135
e-ISSN2304-6767
DOIhttps://doi.org/10.3390/dj11050135
URN:NBNurn:nbn:hr:127:523775
Datum objave publikacije2023-05-16
URL dokumentahttps://www.mdpi.com/2304-6767/11/5/135
Vrsta resursaTekst
Prava pristupaOtvoreni pristup
Uvjeti korištenjaIkona licence Imenovanje 4.0 međunarodna (CC BY 4.0)
Datum i vrijeme pohrane2025-03-10 10:02:40