prikaz prve stranice dokumenta Effect of Conventional Adhesive Application or Co-Curing Technique on Dentin Bond Strength
  Preuzmi
PDF 2.1 MB
Znanstveni rad - Izvorni znanstveni rad
Effect of Conventional Adhesive Application or Co-Curing Technique on Dentin Bond Strength
Materials, 14 (2021), 24; 7664. https://doi.org/10.3390/ma14247664
Vukelja, Josipa; Klarić Sever, Eva; Sever, Ivan; Jukić Krmek, Silvana; Tarle, Zrinka

Citirajte ovaj rad

Vukelja, J., Klarić Sever, E., Sever, I., Jukić Krmek, S. i Tarle, Z. (2021). Effect of Conventional Adhesive Application or Co-Curing Technique on Dentin Bond Strength. Materials, 14. (24). doi: 10.3390/ma14247664

Vukelja, Josipa, et al. "Effect of Conventional Adhesive Application or Co-Curing Technique on Dentin Bond Strength." Materials, vol. 14, br. 24, 2021. https://doi.org/10.3390/ma14247664

Vukelja, Josipa, Eva Klarić Sever, Ivan Sever, Silvana Jukić Krmek i Zrinka Tarle. "Effect of Conventional Adhesive Application or Co-Curing Technique on Dentin Bond Strength." Materials 14, br. 24 (2021). https://doi.org/10.3390/ma14247664

Vukelja, J., et al. (2021) 'Effect of Conventional Adhesive Application or Co-Curing Technique on Dentin Bond Strength', Materials, 14(24). doi: 10.3390/ma14247664

Vukelja J, Klarić Sever E, Sever I, Jukić Krmek S, Tarle Z. Effect of Conventional Adhesive Application or Co-Curing Technique on Dentin Bond Strength. Materials [Internet]. 12.12.2021. [pristupljeno 24.04.2024.];14(24). doi: 10.3390/ma14247664

J. Vukelja, E. Klarić Sever, I. Sever, S. Jukić Krmek i Z. Tarle, "Effect of Conventional Adhesive Application or Co-Curing Technique on Dentin Bond Strength", Materials, vol. 14, br. 24, Prosinac 2021. [Online]. Dostupno na: https://urn.nsk.hr/urn:nbn:hr:127:879702. [Citirano: 24.04.2024.]

Za citiranje koristite ovu mrežnu adresu: https://urn.nsk.hr/urn:nbn:hr:127:879702
Prijavite se u repozitorij kako biste mogli spremiti objekt u svoju listu.
Podaci o radu
Naslov (engleski)Effect of Conventional Adhesive Application or Co-Curing Technique on Dentin Bond Strength
AutorJosipa Vukelja
AutorEva Klarić Sever
AutorIvan Sever
AutorSilvana Jukić Krmek
AutorZrinka Tarle
Autorova ustanovaSveučilište u Zagrebu
Stomatološki fakultet
Znanstveno / umjetničko
područje, polje i grana		BIOMEDICINA I ZDRAVSTVO
Dentalna medicina
Endodoncija i restaurativna dentalna medicina
Sažetak (engleski)
The aim of this in vitro study was to assess the effect of two different adhesive application methods on shear dentin bond strength (ISO 29022) using three various adhesive systems. A mid-coronal section of 77 intact third human molars with fully developed apices was made to create flat bonding substrates. The materials used in the study were Excite F (Ivoclar Vivadent), Prime&Bond Universal (Dentsply Sirona) and G-Premio Bond (GC). The application of each adhesion system was performed in two different ways. In the first group, the bonding agent was light cured immediately after the application (conventional method), while in the second group the adhesive and composite were cured concurrently (“co-curing” method). A total of 180 specimens were prepared (3 adhesives × 2 method of application × 30 specimens per experimental group), stored at 37 °C in distilled water and fractured in shear mode after 1 week. Statistical analysis was performed using ANOVA and Weibull statistics. The highest bond strength was obtained for Prime&Bond conventional (21.7 MPa), whilst the lowest bond strength was observed when co-curing was used (particularly, Excite F 12.2 MPa). The results showed a significant difference between conventional and co-curing methods in all materials. According to reliability analysis, the co-curing method diminished bond reliability. Different application techniques exhibit different bond strengths to dentin.
Ključne riječi (engleski)
Jezikengleski
Vrsta publikacijeZnanstveni rad - Izvorni znanstveni rad
Status objaveObjavljen
Vrsta recenzijeRecenziran - međunarodna recenzija
Verzija publikacijeObjavljena verzija rada (izdavačev PDF)
Naslov časopisaMaterials
Brojčani podacivol. 14, br. 24, 7664
e-ISSN1996-1944
DOIhttps://doi.org/10.3390/ma14247664
URN:NBNurn:nbn:hr:127:879702
Datum objave publikacije2021-12-12
URL dokumentahttps://www.mdpi.com/1996-1944/14/24/7664
Vrsta resursaTekst
Prava pristupaOtvoreni pristup
Uvjeti korištenjaIkona licence Imenovanje 4.0 međunarodna (CC BY 4.0)
Datum i vrijeme pohrane2022-11-03 12:31:06